Tampilkan postingan dengan label 1100. Tampilkan semua postingan
Tampilkan postingan dengan label 1100. Tampilkan semua postingan

Nov 1 5 zero miles Five More Laydays in Oriental

Selasa, 01 Maret 2016

0 komentar
We end up spending eight nights here. Thats the way it is in shipyards. It takes longer and costs more than expected.  Deatons however, is a very fine yard. Small but bustling with activity, with friendly competent and helpful staff, free electric which we used to warm the boat through our heat exchanger on the cold nights, and a small lounge with a washer dryer $3.50 per load), good shower, TV and a small desk and sofa. We really became friends with the staff who all cheered the news when Witty was found. John Deaton and his wife, Karen have owned and operated the place with service manager and master teacher Greg, their son Steve, Rita, who was the most helpful about Witty and maybe about 20 -30 other folks.  We had business and they let us fax letters and photocopy others -- no charge.
And despite the gloom of Wittys potential demise, or perhaps because of it (and after his return) work on the boat (and life) went on.
Our friends, Bill and Sando,
saw how ratty looking our small jib sheet had become and gave us a new one, from his old Saga, which had been offered for sale in a consignment store. A very valuable gift. I whipped its new ends when I cut it into two pieces to serve as the sheet and as a line to better secure the dink. Bill also taught me a better placement for the shackle at the clew of the sheet and Lene helped me pull the new line through its under the deck channel with a snake.
 I saw that Oriental has a dealer for AB Inflatable dinghys and scored a valve cover for ours and I used electrical tape to enlarge the washer and thereby make a better fit for the air pump nozzle to inflate our dink. I tried to change the zinc in the refrigerator unit but needed the yards help when the old zinc twisted off in its holder (a new brass holder at $7.50 was a lot cheaper than the labor needed to melt the zinc out of the old one). Lene ordered the electronic versions of Waterways Cruising Guides to the Intercoastal by Mark Doyle. I polished and waxed the stainless steel of the bowsprit and bow pulpit and cleaned out the bilge. This in addition to overseeing/assisting the yards workers who hauled the boat two more times, replaced the lip of the Strong Seal (dripless stuffing box) in an attempt to stop the leak, aligned the prop shaft with the engine by shifting the engine on its mounts, and took ILENE out for a test drive which shows that we have good alignment --but we still have a leak, The cause this time is believed to be a distorted plastic disc bolted with four bolts to the transmission and four more to the shaft. It is plastic so it will shatter to prevent harm to the transmission if we hit something. Our choices were to get a replacement disc, or one of steel to take up the space, or get a new longer propeller shaft so no such spacer would be needed. We chose option A, and it is being sent to friends in Florida for me to try to install there.

But it was not all boat work and Witty worry. We had a tour of Bill and Sandos big new 45 foot dual engine DeFever trawler, named Lucille, like her predecessor, their Saga.
.
Bill loves that it has easy access at dock level from the stern, does not have an open fly bridge (which he would not use), and has wide, safe, covered, exterior passageways. He is a perfectionist about his boats, keeping them pristine and making many improvements for comfort, safety and convenience. A minor example of these is the port side rear view mirror shown in the first photograph. M/V Lucille was in Maine this past summer and we hope to join Bill and Sando there in the summer of  16. I continue to very much admire Bills gentle, intelligent advice over the years and Lene says he has the best sense of humor.  He prefers to make longer off-shore passages to get to the desired cruising grounds more quickly, a very useful philosophy as we head south trying to get where it is warm before it gets too cold up here after a delay of a week.
Then, we had drinks and snacks at their lovely spacious modern home, raised about five feet above their lawn, which reaches to to the seawall,
which in turn is five feet more above sea level, with a commanding view of the Neuse River and all the boats that necessarily traverse it on the ICW. All told we enjoyed three dinners out with them, at half the local eateries, "M and Ms," "The Silos" which is built in two connected silos and "Toucan", and two breakfasts with them aboard ILENE.

And I played with the blog and determined that on the ten separate days that we made passages in October since we left Annapolis on October 12, we totaled 351 miles -- compared to the 268 we made in less than 48 hours from the Harlem to Annapolis on October 8-10. We went shopping for groceries several times and took Witty to the vet. Lene has a cold and visited a local emergency medical place and the Walmarts pharmacy. I try to not patronize Walmart whose owners get rich by paying their staff so little that we taxpayers subsidize them through food stamps etc.  But here we shopped at their store which was one of the places that put up a the lost kitty poster.

People in Orient are friendly and honest. The Yard leaves the keys to two of its old vehicles with a signup sheet for use by residents. I put some gas in the tank. I asked the man in the chandlery if I could return the valve cover if it didnt fit. He said: "Dont pay me now: come back and pay me if it fits". When I took our propane tank for a refill, the hardware store man said it was a flat service fee for filling, that the tank seemed 3/4 full and he couldnt charge me $12 for only $3 worth of gas. While walking around on the afternoon after the big storm, I saw folks gathering pecans that had fallen off of trees during the storm. Later I stooped to pick one up and Lee gave me a bag of them from her tree and invited me into her house to meet her husband Billy and their family, who were eating their dinner. They relocated here about a month ago from Orange County, NY. See, it doesnt take long here for the friendliness habit to set in.

I visited the Oriental Historical Museum and took most of one of their walking tours, past the towns historic houses. Oriental was a poor town founded in the late 1870s by hard working fishermen and farmers. This house, with its metal roof, like many of them, was the home of a prominent citizen in its day and is still very well maintained.
Mr. Midyette was the founder. When the post office was established here in the 1870s a name was needed. Mrs. Midyette thought of the steamer "Oriental," which had been wrecked (without loss of life) while carrying people and property for the US government during the Civil War in 1862. This wreck was on the outer banks, about 30 miles from here but Mrs. Midyette suggested the name and it has been so ever since. The name gives rise to the Asian theme including dragons. Here is a view from the middle of Broad Street, also known as Route 55, the main drag, looking west.
 I took a shot looking the other way, which was equally devoid of activity. You can get the idea that traffic jams are the not a big problem in this town. I did not get the full picture when I asked about population. The lovely, dedicated and knowledgeable volunteer at the museum told me it was 750. The Census Bureau reported 900 in 2010. But Im thinking both omitted the people who live in newer larger homes outside, but have Oriental mailing addresses, such as our friends, Bill and Sando. The town still has fishing but its farming gave way to lumber mills which were located where the public dock is now and from which I took this picture of the 1970s era bridge, which replaced the very much narrower wooden bridge of the depression era.
There are several  marinas on this side, the upstream side of the bridge, but not for us, because the bridge height is 55 feet.
 After the mills were shuttered the town was rescued by the boating community. 2700 boats is a lot of boats for what is still a very small town. I believe that much of the money in town nowadays comes from folks who retire here to live with their boats in a moderately warm place.
We plan to stop here again on our return trip back home.
Read More..

Header Photo Curvaceous French Classic Moth

Kamis, 25 Februari 2016

0 komentar
Mariposa Moth Classique, Plans de Moth Classique


Mark Morell Photo

The previous header photo featured a French Classic Moth Mariposa (Spanish for butterfly) sailing in tandem with a Nantais Vintage Moth (blue sail) at the French annual Classic Moth rally and regatta which was held yearly during the early 2000s. The strong sheer gives Mariposa a traditional look which suggests a traditional round bottom shape.

Nope. The header photo above is an optical illusion as other photos reveal that Mariposa is actually a multi-chine plywood shape (a three-planker) with the bow sections developed and pulled up.

Mariposa has a flat rocker panel that starts just in front of the daggerboard case and a topside chine that curves up to meet the gunwhale about 600mm from the bow. The developed bow suggests this Moth was built using the stitch and glue method.


The French Classic Mothists weigh their Moths like the Americans - on a bathroom scale. The scratched up bottom shows that Mariposa is not a coddled racing dinghy - and gets plenty of use.


An in-the-water shot of Mariposa shows the topside chine clearly disappearing into the gunwhale.
This Moth design is visually appealing - Mariposa may not be much of a racer but thats OK.


The designer is the tall gentleman on the left. I have no idea who he is. Maybe some reader could help out on identification?

Update, August 14: Dominique Banse to the rescue with the designer indentification. Thanks Dominique!
"There is an article about this Moth in the French magazine “Chasse-Marée” number 147 from November 2001. The owner builder’s name is Bertrand Warion. The boat is built with 5mm plywood and weights 76 kg."


Update September 29, 2015: Designer Bertrand Warion adds a comment to this post updating us on the latest with Mariposa.
"Hello ,I am Bertrand Warion who designed Mariposa and usual reader of your blog.

The boat is still in good condition with great modifications, large cuts to flatten the bottom rocker and new cockpit plan, more "modern" but quite unconfortable for me. [I am] thinking to ameliorate that point.

I did not sail Mariposa [for] 5 years (leaving job, town) and [now] mainly designing and building others boats but i will recondition the boat soon.

Here are some new Mariposa pics.


There are a few enterprising readers of this post who could put together their own version of Mariposa, at least in model form. Earwigoagin is always open to publicizing such design experimentation.

Through the early 2000s the French Classic Mothists held an annual get together. I think it was originally held at one of the clubs on the Seine but then moved over to a small lake about 100 km. south of Paris, sponsored by Cercle de la Voile du Centre, Etang du Puits, (Google translation - the pond of the well), just off the Route dArgent. Though well attended, in a mystery still not explained, the annual French Classic Moth gathering and regatta just stopped. [Mystery somewhat explained - see below] .


The mystery of the French Classic Moth get-together got somewhat clearer when reader Dominique Banse emailed an article from a 2001 issue of Chasse-Marée, the French classic/traditional boating magazine. It turns out that all these photos were taken at a Classic Moth design competition that was sponsored by Chasse-Marée and held at Suc dErdre, just north of Nantes (and not at Etang du Puits as I wrote initially). There was a turn out of 20 Moths Classique, both new designs and old, as well as several IMCA narrow skiffs. There is still no explanation why the Classic Moths in France could not keep the annual event going after 2001.


 I recently rediscovered on the Web, photos from Marc Morell (who took all the photos used in this post) documenting the Suc dErdre. The diversity of French Classic Moths is just astounding! Ill feed more of these photos into later posts on Earwigoagin.


Read More..

D Zero Singlehander Video

Selasa, 02 Februari 2016

0 komentar
In the battle in the sailing marketplace to be the next "modern" singlehanded racing dinghy there is, besides the RS Aero, the Devoti D-Zero, designed by Brit Dan Holman. Visually the D-Zero looks more "swoopier" than the Aero and the snout, the area in front of the mast, looks more pronounced. The D-Zero is not as super-light as the RS Aero (but at 42kg still very light).

There is the rumor on the InterWebs that Melges also has a 14-foot singlehander in pre-production testing. This will add an interesting third new singlehander to the mix; a development bemoaned by some as cluttering up consumer choice and prohibiting one class from gaining traction. However, it is not a bad move by Melges, given the odd tendency of Americans not to buy sailboats that were foreign designed or built (or if they were foreign designed we need to re-work them such as the Collegiate 420 or Collegiate FJ).

Back in Mark 2014, I did a post of the unveiling of the RS Aero and Devotti D-Zero at the London Dinghy Exhibition.

As promised, a send-them reaching video of the Devotti D-Zero.



Read More..

Copyright © 2014-2022 Sailboat Plans | Powered By Blogger